Skip to main content

The Pipeline: Capture to Splat

MODULE SYLLABUSINTERMEDIATE
📖2 min read

Introduction​

This module is the walkthrough. You plan a capture that suits splat reconstruction, run the training pipeline, and quality-check what comes out — including the failure modes that quietly produce a model that looks right and measures wrong. By the end you have run a capture through to a trained splat model.

Module Overview​

Est. time60 minutes
TypePipeline
PrerequisitesModule 02 — How Splatting Works
Read firstThe Pipeline: Capture to Splat

Learning Outcomes​

By the end of this module you will be able to:

  1. Plan a video or photo capture that suits splat reconstruction — coverage, overlap, and lighting
  2. Run the training pipeline from source media to a trained splat model
  3. Evaluate the result for the artifacts that matter in an investigation: floaters, distortion, and missing coverage
  4. Record the settings and versions so the run is reproducible

Module Contents​

The Pipeline: Capture to Splat· 20 min read

The walkthrough: capture planning, the training run, and the checks that separate a usable model from a pretty one.

You'll learn: A repeatable pipeline, with the quality gates that make the result defensible.

Knowledge Check​

Test what this module covered before moving on.

KnowledgeCheck: no pool registered for gaussian-splatting-03. Available: blender, methodology-data, modeling, site-reconstruction-02, site-reconstruction-03, site-reconstruction-04, site-reconstruction-units, the-3d-world

Resources​

Sources​